Right and left screen door stopper

Tired of seeing them break and buying them, I decided to create the model. 

On plate 1 you will find the stopper for the right side

On plate 2 you will find the stopper for the left side

On plate 3 both stoppers

ready for printing according to your needs.

I used PLA

Printing tips (some are already configured, but I prefer to repeat them):

1. do not use tree supports, too difficult to remove!
2. manual support (auto), ideal for the hook
3. with the “support paint” tool, highlight the lower, final part of the hook; it is the thinnest part
4. to increase resistance, I used gyroid as the infill pattern
5. and I set the printing speed for the walls (internal and external) to 180 mm/s, infill to 220 mm/s, and support to 80 mm/s

I hope I have been helpful