Bambu Lab X1 Screen Protection Cover Remixed by Print4Gods

Remixed by

Print4Gods

3D Printer>3D Printer Parts

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

0.16mm layer, 2 walls, 15% infill

Designer

1.1 h

1 plate

4.7(75)

hyaloid membrane

19 min

1 plate

0.2mm Standard reicht völlig aus

1.1 h

1 plate

Boost

106

193

406

296

Released

Description

Bambu Lab X1 Screen Protection Cover

You only need 1.75mm Filamet to assemble

I've improved the print bed adhesion

Have Fun

Comment & Rating (81)

@MajkyMajk

Nice

@user_3756112297

Print Profile

0.16mm layer, 2 walls, 15% infill

Perfect to keep the dust off and protect the screen when not in use.

@MIKELDABOSS

Print Profile

0.16mm layer, 2 walls, 15% infill

muy bueno!!

@thibault.proto2

Print Profile

0.16mm layer, 2 walls, 15% infill

Very good product. Does the job well. (small suggestion: making the location to insert the micro SD card would be the best)

@DarNoire

Print Profile

0.16mm layer, 2 walls, 15% infill

fit perfect

@KW3DP

Print Profile

0.16mm layer, 2 walls, 15% infill

Bambu logo printed between layers and is not visible. Is it supposed to print that way and only show through with light from the screen? Good print other than that

@kitgerrits

Print Profile

0.16mm layer, 2 walls, 15% infill

The sliced print says ABS/ASA with ASA suggested. I printed using eSun ABS with the generic preset with PA calibration (Studio sees and applies my custom profile, Handy does not). The first layer stuck to the plate but subsequent layers let go. resulting in a big spaghetti mess.