Compact Collapsible Dice Tower

Compact Collapsible Dice Tower (updated)

This “Compact Collapsible Dice Tower” is an amazing crate of wonders that can be easily packaged up into the box that also serves as a dice catcher!  GM/DMs at all the best gaming tables will be envious of your “nat 20’s” and suave dice tower that packs down into such a rugged compact container!

Jokes aside, a couple of notes on this;

• Everything is friction fit, from the lid on the box to the parts of the tower.  This has been tested on Bambu printers using a variety of PLA filaments.  Depending on your filament/printer/tolerances/etc., you may need to tweak things slightly.
  • If something is too tight, a light sanding will sort it out in most cases.
  • If something is too loose, a drop of superglue (unassembled, wait for it to dry) can provide the friction needed for a good experience.
• This is provided with the original “thin” lid and the newer “thick” lid, choose wisely.  (They are interchangeable.)
• Blank “walls” have been provided for your own creative designs/control.
• The tower is not really suited for metal dice, so if you use them, your mileage may vary.
• A spot of felt in the bottom of the lid, and trays makes for an extra-super classy rolling surface, keeps the noise down a tad, and almost guarantees natural 20's ;)

Looking for dice, pen & pencil storage -and- a nice compact collapsible dice tower?  Check this one out;

• https://makerworld.com/en/models/729094