Renishaw OMP 40 Protector / Collision Protection
Print Profile(1)
Description
Protector for Renishaw OMP 40. The ring is a few millimeters bigger than the head of the Renishaw OMP 40. You can mount it directly to your OMP 40 with a threaded pin m3x6mm. The Thread M3 is printed as well. If the hole in the middle is to tight you just can ream it with an Ø7H7. The hole is designed with Ø7,05mm but every shaft of the OMP 40 is a bit different.
Protector for the Renishaw OMP 40 probe. The ring is a few millimeters larger than the OMP 40 probe head itself. You can screw it directly onto the OMP 40 with an M3x6mm threaded pin. The thread is printed, which also works, but I manually re-tapped it anyway. The hole in the middle is a Ø7.05mm bore. Since the shafts of the OMPs or the rubies are slightly different, if necessary, the bore can be re-worked with an Ø7H7 reamer until the ring fits the OMP.
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)