Bowling Ball Keychain - Disco Ball - Mirror Ball
Print Profile(1)
Description
Bowling Ball / disco ball,
In the file, I included the mirrored ball in various formats.
Keychain, the first one I made, I realized the hole for the keychain was too close to the edge, so I included a second version with the hole a couple of lines further from the edge.
I also included the file without a hole in case you want to use it for something else.
Recommendation when printing, use brim / raft or brim for better adhesion, especially if using a bed with effects like the one in the image.
If you use a textured bed, it also works very well.
Any questions or improvements, you can leave them in the comments.
Profile Settings.
Layer Height 0.2 mm
supports: NO
infill: I like keychains with some infill, that's why I set it between 20 and 35%
if you are going to use a bed that does not have good adhesion, I recommend lowering the first layer speed to avoid printing errors
I also recommend using brim to improve adhesion.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)