WasAGoodIdeaAtTheTime

cover

20251001_213952.jpg

20251001_194517_(1).jpg

plate_1.png

2025-10-01_3bd6ff21bb4728.jpg

Base & Original Top Cover - 0.2mm layer, 2 walls, 15% infill

20251001_221734.jpg

Base Only - 0.2mm layer, 2 walls, 15% infill

tricianX

IMG_2056.JPEG

IMG_2059.JPEG

IMG_2058.JPEG

IMG_2054.JPEG

IMG_2057.JPEG

IMG_2061.JPEG

IMG_2063.JPEG

I wasn&#39;t able to find a Panda Branch base that fit with my A1 to mount on the Z Axis.  My screw holes only measured 42mm.  This one was the closest so I tinkered with it and was able to shave off the distance between the screw holes.  Decreased it from 54mm to 42mm.I bought my A1 in August so maybe its a new configuration for the screw holes.I also tried adding some starter holes to the screws holes at each end so it&#39;s easier to attach the cover to the base.   It came out well in the slice but didn&#39;t really print well. You still have to use some elbow grease to get the screws to catch.Before printing, measure your screw holes on the Z Axis - if they are 54mm apart, use the original print profile.  If they are 42mm apart like mine are then this base should work for you!

Revised Base only - for newer A1 w/ diff screw holes (42mm)

Design To Refine

Panda Branch Screw Mounted A1 Mini

Panda Branch Screw Mounted

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you like the design and/ or benefit from the model, I&#39;d be grateful for a boost!</boostcontent></boostme>A remix of @ProtrudeProduct&#39;s remix for the A1 Mini, to allow mounting of the BIGTREETECH Panda Branch Case to the A1&#39;s Z-Axis.&nbsp;2 x M3x6 socket cap head screws required for mounting. Untested, but M3x8mm will also likely work.&nbsp;The top case cover is as per BIGTREETECH&#39;s original design.&nbsp;Print profiles available for the remixed base alone, and both the remixed base and the top case cover.

Print Profile(3)

Description

Comment & Rating (29)

This remix is based on

License

Remixes (1)

Related Models

A1 Z-Axis Screw Mounted Panda Branch