TPU print cover for firestick

This flexible TPU cover is designed to snugly fit the Firestick remote shown in the reference image, offering grip, impact protection, and full button accessibility. Ideal for everyday use and printed in soft filament.

🔧 Features

• Exact fit — Matches the shape and button layout of the Firestick remote with Netflix, Hulu, Prime Video, and Disney+ shortcut buttons.
• Shock-absorbing TPU — Protects against drops and bumps while remaining lightweight.
• Textured grip — Slightly rough surface improves handling and reduces slip.
• Full access — All buttons, microphone, and IR areas remain fully usable.
• Raised edges — Slight lip around the front helps protect the remote face-down.

🖨️ Print Settings

• Material: TPU (Shore 95A or softer)
• Layer height: 0.2 mm
• Walls: 3 perimeters
• Infill: 15–25% (gyroid or grid)
• Top/bottom layers: 4–5
• Orientation: Print standing upright or on its back depending on slicer preview
• Supports: Usually not needed
• Speed: 20–30 mm/s for walls, 30–40 mm/s for infill
• Cooling: Low to moderate

🧪 Fit and Adjustments

• Test fit gently — TPU stretches slightly and conforms to the remote.
• Too tight? Scale to 101–102%
• Too loose? Scale to 98–99%

📦 Compatibility

• Designed for the Firestick remote with dedicated buttons for:
  • Netflix (red)
  • Hulu (green)
  • Prime Video (blue)
  • Disney+ (dark blue)

If your remote differs, feel free to request a variant.