Pumpkin-Dul

Halloween 2025 is coming soon and now is the right time to prepare

The pumpkin model Dul comes with a pumpkin that is either completely

_pumpkin.dul.body.full.(50|70|90).stl_

or as two pluggable halves

_pumpkin.dul.body.half.(50|70|90).stl_

can be printed

There are three different sizes: 50, 70, and 90mm. The size refers (approximately) to the height of the pumpkin

The pumpkin has a threaded opening at the top where you can screw in a stem

There is the stem without a hole

_pumpkin.dul.stem.solid.stl_

if you only want to display the pumpkin. The second version

_pumpkin.dul.stem.hole.stl_

has a horizontal hole so you can hang the pumpkin by its stem

You can print all parts without AMS and still create a colorful variety

Further Notes

All models in the pumpkin series have been designed by me, constructed with openScad, and printed and improved through many iterations

Each pumpkin has its own stem. However, the stems are compatible with the other pumpkins in this Pumpkin Series

Tips for Custom Print Profiles

If you want to download the STL files directly (and not use my print profiles), here are some tips for you

The pumpkin needs support at the bottom so it doesn't detach from the build plate

The internal thread of the pumpkin should always be printed without support, as it is very difficult to remove supports from the internal thread (So it's best to use a support blocker)

The stems also need support and should be printed a bit slower, otherwise they break too easily

More Pumpkin Models

There is also another pumpkin model