Go-kart modification parts: H-102 H-106 front wheel spacer and sleeve compatible with children's bike wheels

Go-kart modification parts: H-102 H-106 Front wheel spacers and sleeves for children's vehicle wheels

Note: This is not compatible with LEGO or other brands of brick toys!!!

Note: This is not compatible with LEGO or other brands of brick toys!!!

Note: This is not compatible with LEGO or other brands of brick toys!!!

These are giant bricks, approximately palm-sized, that can be used to build indoor houses, vehicles, etc...

This part is adapted for children's vehicle wheels and double-ended internally threaded cylindrical pins

The link for this children's vehicle wheel is: https://item.taobao.com/item.htm?from=cart&id=39525904393&pisk=gT1sX11kmcm_2aRxld4EOEyT4MRbhyPzGqTArZhZkCd9cI_fyKh4ICJXGMKF_h7w6nOflapA0n7ZS9jPyf5aIIlXsIAY4uPzaVbMiIQ2ZghrjWLkoSltMjdM9G-LFXVzaNbI7FUPJ75VxtWvWxhADdpKJF-KWFLADphpoHh9kfLxvytHvfLxBIppJE8sWxIvXWhplUg9DnKT9HKHkILADIUBpHYxBf3WlRTA5PzPt8W89J6wAjhAOeED2NiEnHBv5_t5W1ioqrY6C3Q9vu_Vv-pdoK1moj9VWTjDyGnTcnfCJ1BR2kkwXTTfzts8uAYeh1ABD1FoPHC1l69GLcH9PCt6e1p8Gz_JH91B_1EmEw7BXLOFLJqw3Cs1E3vTKkjfRhSA1pn_YnWP81pC2klCmK6A_BCTv7sy_b-WZjDjRLcXR3zQRxD0fW1R9CuQNP99-F9URyiIndLHR3zQRxDDBeY6zyaIAxf..&skuId=3109176330991&spm=a1z0d.6639537%2F202410.item.d39525904393.50ec7484tOs8Er

This cylindrical pin is a custom model: Diameter: 12mm; Length: 150mm; Double-ended holes: M8; Hole depth: 25mm;

--------------------------------------------------------------------------------------------------------------------

Naming rule: a-bbb-c xxxxxxxxx

        a: Type of large brick, generally divided into five categories: Brick, Tile, Beam, Gear, Pin, Other. See below for details.

                Brick-A-: Distinguished between ordinary bricks without holes and technic bricks with side holes. As the basic component for large bricks. The center hole is adapted for M8 nuts.

                Tile-B-: Thickness is 1/3 of a brick, meaning three stacked tiles can form a brick of the same type. The center hole is adapted for M8 nuts.

                Beam-C-: The thickness of the beam is similar to that of a tile, but the protrusions of the tile are changed into recessed holes, and the hole size is consistent with the side holes of technic bricks.

                Gear-D-: Gear.

                Pin-H-: A component used to connect various holes.

                Axle-I-: No 3D printed part design for this component. This component is replaced by 3030 European standard aluminum profiles.

        bbb: Serial number of the large brick:

                First digit b: indicates layer height, generally 0 for single layer, 2 for double layer, 3 for triple layer.

                Middle digit b: indicates number of rows, generally 1 for single row, 2 for double row.

                Last digit b: indicates number of columns, generally 1 for single unit, 2 for double unit, 3 for triple unit, and so on.

        c: Variant of this model, arranged sequentially from ABCDEFG...

        xxxxxx: Chinese description for this content model.

--------------------------------------------------------------------------------------------------------------------

Adapted size data:

--------------------------------------------------------------------------------------------------------------------

Open Source License: Complying with the CC-BY-NC-SA open source license. Including but not limited to the following requirements:

        1. Modified models based on this open source scheme must comply with the equivalent open source license of this scheme.

        2. This model may not be used for commercial activities without permission, including commercial educational activities.