Go-kart modification part: A-013-B 1x3 Technic brick lithium battery pack modification part

《Go-kart modification part: A-013-B 1x3 Technic brick lithium battery pack modification part》

Note: This is not universally compatible with LEGO or other brands of block toys!!!

Note: This is not universally compatible with LEGO or other brands of block toys!!!

Note: This is not universally compatible with LEGO or other brands of block toys!!!

These are giant blocks, about the size of a palm, and can be used to build indoor houses, vehicles, etc...

Used to adapt to Go-kart modification part: A-013-C A-014-C Technic brick 1x3 1x4 lithium battery pack modification interface:

Adapts to XT60E-F fixed mount, secured with 6 M3 * 30mm countersunk self-tapping screws.

Compatible with Dayi A3 interface batteries, with a nominal voltage of 21V, 5S 18650 lithium-ion batteries in series, actual voltage between 18.5~21V, unlimited capacity.

Requires 2 Dayi A3 batteries in series to achieve a voltage of 37~42V, replacing 3 series of 12V lead-acid batteries.

Note: Please use brand new battery packs from authentic channels and ensure that the batch, voltage, and capacity of both battery packs are consistent!!!

Note: Please use brand new battery packs from authentic channels and ensure that the batch, voltage, and capacity of both battery packs are consistent!!!

Note: Please use brand new battery packs from authentic channels and ensure that the batch, voltage, and capacity of both battery packs are consistent!!!

--------------------------------------------------------------------------------------------------------------------

Naming convention: a-bbb-c xxxxxxxxx

        a: Type of large block, generally divided into five categories: Brick, Tile, Beam, Gear, Pin, Other. See below for details.

                Brick-A-: Divided into ordinary bricks without holes and Technic bricks with side holes. Serves as the basic component for large blocks. The central hole is adapted for M8 nuts.

                Tile-B-: Thickness is 1/3 of a brick, meaning three layers of tiles stacked can form a brick of the same type. The central hole is adapted for M8 nuts.

                Beam-C-: The thickness of a beam is similar to a tile, but the tile's protrusions become concave holes, and the hole size is consistent with the side holes of Technic bricks.

                Gear-D-: Gear.

                Pin-H-: Component used to connect various holes.

                Axle-I-: No 3D printed design for this component; this component is replaced by 3030 European standard aluminum profiles.

        bbb: Serial number of the large block:

                First b: Represents layer height, generally 0 for single layer, 2 for double layer, 3 for triple layer.

                Middle b: Represents number of rows, generally 1 for single row, 2 for double row.

                Last b: Represents number of columns, generally 1 for single unit, 2 for double unit, 3 for triple unit, and so on.

        c: Variant of this model, arranged sequentially from ABCDEFG...

        xxxxxx: Chinese description for this content model.

--------------------------------------------------------------------------------------------------------------------

Adaptation dimension data:

--------------------------------------------------------------------------------------------------------------------

Open source license: Compliant with CC-BY-NC-SA open source license. Including but not limited to the following requirements:

        1. Modified models based on this open-source scheme must comply with the equivalent open-source license of this scheme.

        2. This model may not be used for commercial activities, including commercial educational activities, without permission.