Mammotion Luba Mini AWD Rim/Wheel Protection - Free 3D Print Model

Search models, users, collections, and posts

MK_Ultra

Household>Garden

IP Report

Print Profile(1)

All

X1 Carbon

P1P

H2D Pro

H2D

P1S

A1 mini

X1E

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 3 walls, 10% infill

Designer

2.1 h

1 plate

4.8(12)

Open in Bambu Studio

Boost

204

256

114

Released

Description

Content has been automatically translated.

Show original

A rim protection for the Mammotion Luba AWD Mini.

Protects the wheel if the robot scrapes against a wall.

Boost Me (for free)

If you like the model, leave a Boost !

Required

filament: PETG, ABS, PCTG, ASA, or any other weather-resistant filament

Screws : 6 pcs. M4x20 (for the front wheels)

6 pcs. M4x30 (for the rear wheels)

Optionally a drop of medium-strength threadlocker per screw

Comment & Rating (21)

@Dreamteam.2019

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

Great idea Especially no more fear of scratching the tires and rims!!! 😁 Print worked great

Show original

@Dreamteam.2019

Boosted

Replying to @user_2869574618 :

But the description clearly states that you should use M4x30 screws 😉🙂

(Edited)

Show original

@user_2869574618

Replying to @Dreamteam.2019 :

I overlooked it. Sorry for the comment. I've deleted it 😉

Show original

@Dreamteam.2019

Boosted

Replying to @user_2869574618 :

No worries, I didn't mean anything bad!!! 😊

Show original

@Pinpinou

Print Profile

0.2mm layer, 3 walls, 10% infill

Supports... a pain to remove About 30 minutes to clean up 4 PETG hubcaps

Show original

@wimpel.funkeln_

Always print the support interface with PLA, it doesn't bond with PETG

Show original

@user_49004082

Print Profile

0.2mm layer, 3 walls, 10% infill

look great thanks for sharing the file

Show original

@user_2869574618

After initial problems because I couldn't read the description properly 🤦🏼‍♂️ now my comment. The print is wonderful and looks really great! Thank you very much for the template 👍🏻👍🏻👍🏻 Maybe there will be a few BBS LeMans soon. That would be awesome

Show original

@davidprint

Print Profile

0.2mm layer, 3 walls, 10% infill

@_AD3D

Thanks for the file 👌🏻 Do you also have the file for the rear spoiler, it looks awesome too Kind regards

The designer has replied

Show original

@MK_Ultra

the rear spoiler was unfortunately bought 😅

Show original

@user_2343773969

Hello, what screws did you use? Socket head cap screws or countersunk screws? For me, the screw holes are too small/tight for both types

The designer has replied

Show original

@MK_Ultra

Cylinder head

Show original

@puppe

Print Profile

0.2mm layer, 3 walls, 10% infill

top. passt super

@user_697516479

Print Profile

0.2mm layer, 3 walls, 10% infill

Top !!!

@semovarjc

Print Profile

0.2mm layer, 3 walls, 10% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.