Stevenson Screen for Weather station sensors

A Stevenson Screen for weather station sensors. Designed to allow full air flow while keeping out the worst of what mother nature can throw at it. 

Door is print in place and shouldn't require much force to get it to open after printing. NOTE: Bambu Studio will complain about floating cantilever in this part. Ignore it as it's the built in clearance for the door and it will print fine. 

Model will require a 256mm3 build plate at 100% scale. Print with 3 walls, at least 15% infill and no supports necessary. Some superglueing of parts is required. Those being, the roof leg sockets and the joints for the roof. A dry fit of the joiners should be attempted first before gluing since no support was used for the slots that they fit into. 

Depending of the filament you choose, you may need to paint it for UV proofing.