LEAF - PEQ For PEQ-15 Laser Front Mechanical Sight

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.This is a cosplay prop.

Thank you to everyone who provided me with the photos.

 

No assembly instructions can be released at this time. Could not pass review.

LEAF - PEQ  Fixed iron sight for the ATPIAL series of lasers, suitable for LA5, PEQ15 and C models. Mounts to the front of the device, taking up only half the rear sight slot.

It is better to use metal M5 screws, the rear sight can be adjusted up and down.You can match my L3Harris / EOTech PEQ-15 LAM Lighting Aiming Laser toy model to decorate your toyhttps://makerworld.com/zh/models/1653088-l3harris-eotech-peq-15-lam-lighting-aiming-laser#profileId-1747985

You can even pair it with a real laser sight for a real "toy".

Thanks to @AmserTheTree for the photo

 

 

Please be sure to comply with your local laws and do not use the model for inappropriate purposes.

Under the new reward mechanism, please "Boost Me" more, give me five-star praise, and welcome everyone to share and show off their finished works, so that I can get more points. Your support is my biggest motivation to continue designing more models.

Reminder:

• Different filaments may cause the parts to be too loose or too tight, and may also make some supports difficult to remove.
• The position of the model printing takes into account strength and appearance (for example: vertical surfaces have better fineness and better representation of patterns and text; horizontal printing axes sacrifice accuracy but have better strength).
• Please keep the printing plate clean. All models are confirmed to be printable. It's not my fault if it turns into spaghetti.
• It is recommended that you equip yourself with a heat gun. Slightly heating the parts can solve many minor problems and can also compensate for minor part tolerances.