CyberBrick Truck Cargo Back Loader for Forklift

CyberBrick Truck Cargo Back Loader for Forklift 🚛🟨

This is a modular cargo back designed for the CyberBrick Truck, created with enough space to carry the CyberBrick Forklift securely on the truck bed.
It follows the same locking method as the official cargo module but allows you to transport your forklift just like in real life!

🔧 Assembly Instructions

1. Front Piece Setup
   • Insert two M2.5 × 6 screws into the sides of the front piece.
   • Place a 4×2 mm magnet into the hole.
     
2. Stand Preparation

   • The circle on the stand may not be perfectly round—trim slightly if needed.

     

   • Fit the stand into the clip part.

     

3. Clip & Loader Assembly

   • Screw the clip onto the back loader using two M2.5 × 6 screws.

     

4. Mounting the Loader

   • Lock the loader onto the CyberBrick Truck, the same way as the official cargo back.

     

5. Ready to Play!

   • Place the forklift onto the loader and enjoy!

     

⚡ Tips for Better Performance

• Self-Loading Forklift
  Adjust the stand (see picture) so it can support the forklift’s weight while climbing.
  
• TPU Tracks Recommended
  TPU will provide better grip when the forklift drives up the ramp.
• Tilt Behavior
  Since the forklift’s battery is at the back, it tilts naturally when climbing from the rear.
  
  Climbing from the front direction is less effective due to the underbody shape.
• Upgrade Suggestion
  Use the CyberBrick Forklift Anti-Tipping Wheel from AlbertW to avoid getting stuck on slopes or kerbs.

🔄 Version Notes

This is my Version 1 design.
I believe there’s still room for improvement—so if you have suggestions, share them!

➡ Follow me to get updates on the next version.
⭐ If you find this model useful or fun, please boost this project—your support helps motivate me to create even better designs!