adapter of HAF-X front I/O panel USB 3.0

One of the front USB 3.0 from my haf-X broke, and my haf-x instead of using  soldered usb 3.0 ports used  some unique cable and was screwed to the PCB, so I bought standard cable and made this adapter.

I tested the old version, it works but the right usb is slightly miscentered by 1mm aprox. it still works prefectly, but if you want you can use the other one which should fix it

you will need:

-

• the cable in the picture
• 1x M2.5x6mm self tapping screw
• 2x m3 brass insert (4.6mm external diameter)
• 2x m3x12/14mm screw

the inserts go in the thin side of the adapter, pus them about 1 mm it melts the bottom part too.