Schuko Smartphone Holder (CEE 7/3 socket)

A fully 3D-printable smartphone holder that plugs directly into standard “Schuko” wall outlets (also known as CEE 7/3 or type F). No supports or additional parts are required – just print, assemble, plug, and use. Perfect for keeping your phone safely in place where desk or countertop space is limited.

Please note: The adjustment mechanism is not meant to be constantly adjusted. The bolt has to be removed with quite a bit of force to re-adjust the angle.

Print Settings:

• Orientation: All parts lying flat on their flat side
• Supports: Not required
• Infill: ~20%
• Wall loops: 3
• Material: Any standard filament (PLA, PETG, ABS, etc.)