Bitaxe Gamma Rear Fan Stand

FOLLOW me for new updates and models - https://makerworld.com/en/@menerso 

Check out my other Bitaxe accessories - https://makerworld.com/en/collections/5419271-mining-accessories

Check out my original Bitaxe Stand that I now modified for more cooling - HERE (use the spacer sticks from here if you want to)

UPDATE: 04-13-26

Added a “connector plate” profile in case you wanted to mount multiple Bitaxes side by side.  The spacer is 20mm wide and it comes with 3 x 30mm pins that are used to attach the left side of the stand with the spacer and the right side of the next stand.  Simple.

----------

This stand still has the ability to mount to a wall and add hexagon sticks for color or even for added weight. ( I put some linear ball bearings on the bottom to add more lower base weight, so it is not easy to knock over.)

It really improved my voltage regulator cooling and even the processor temp dropped.

Hardware:

I used the Noctua NF-A6x25 fan, but any fan with a 50mm square hole pattern would work

Use the 4 stubby screws that come with the fan

I used M3x5mm bolts for mounting the Bitaxe to the stand.

Assembly:

Mount the rear fan first using the 4 stubby screws that will auto thread into the fan

Use M3 bolts to mount the Bitaxe to the front.

I used the USB adapter that came with the fan and plugged that into a power supply.

I added 6 linnear ball bearings to the 3 hexagon sticks for weight of the stand (OPTIONAL)

Getting 2.0+ TH/s and average 1.8 TH/s

With my stand and rear fan, I am also running the heatsink and fan from this video

I did purchase a better power supply here too

Check out my other models and Collections.  Why not give me a FOLLOW since you are there.

I post new models and updates to models frequently.