AbLab

cover

Afbeelding van WhatsApp op 2025-09-09 om 14.54.50_9b780f80.jpg

Afbeelding van WhatsApp op 2025-09-09 om 14.54.50_aa304057.jpg

IMG-20250909-WA0001.jpg

IMG-20250909-WA0002.jpg

IMG-20250909-WA0003.jpg

IMG-20250909-WA0004.jpg

IMG-20250909-WA0005.jpg

Schermafbeelding 2025-09-04 110122.png

plate_1.png

2025-09-09_2f793a6e20aba.png

IMG-20250909-WA0003_(1).jpg

Print Settings<ul><li>Printer: Compatible with most printers</li><li>Orientation: Print upright (standing position) for best detail</li><li>Supports: Required (especially under the arms, socket area, and overhangs)</li><li>Infill: 5–10% is sufficient for strength</li><li>Layer Height: 0.24 mm recommended (use lower for a smoother finish)</li><li>Wall Count: 2 (3 for extra durability)</li><li>Material: PLA or PETG (PETG recommended if expecting higher heat near the lamp)</li><li>Build Plate Adhesion: Brim or raft recommended for stability</li></ul>Assembly Notes<ul><li>Socket: The socket cradle is designed for a snug fit. Leave the pins in place if you plan to screw in the socket. If not, remove the pins with pliers.</li><li>Head: Handle the holding flaps gently. They are only meant to hold the glass in place, not to provide structural support.</li></ul>

0.24mm layer, 2 walls, 10% infill

&nbsp;This is a man-shaped lamp holder designed specifically for the IKEA FADO lamp (24 cm). The model serves as a sturdy and unique base, giving the lamp a playful human-like appearance. A socket is included in the design, making it practical and ready to use once printed and assembled.Perfect for anyone who wants to add a creative, sculptural touch to their FADO lamp setup.

Man-Shaped Lamp Holder for IKEA FADO 24cm

ASIA

Print Profile(1)

Bill of Materials

Description

Comment & Rating (1)

License

Related Models