INSTA360 GO 3/3S RUGGED BOX

I created 3 version of this box called:

360.001 - the box for the GO3 alone

360.002 - the box for the GO3 and the easy clip

360.003 - the box for the GO3, the easy clip and pendant

I designed everything so that the camera and accessories could be stored with as little tolerance as possible, so that they won't rattle around inside the insert during transport. That's why on the internal of the lid you'll find the ceiling lower in some points, cause the ceiling is designed to touch the accessory and immobilize it.

However above the GO3 lens there's 4 mm of clearance, with that space you can add an adhesive sponge in the lid, close to the camera lens.

HARDWARE REQUIRED:

Nr. 4 cylindrical socket head screw  M3 x 20 mm

NOT LONGER, NOT SHORTER, especially the ones for the lock

Then inside the 3mf you'll find N°3 plates with box and lid but with 3 different logos: 

GO3 logo
GO3S logo
INSTA360 logo

Please comment with a picture if you liked it, I want to see your color combinations!