FC Dallas Soccer Team
Print Profile(1)
Description
FC Dallas Soccer Team
If you resize the model make sure you do NOT scale the Z axis or the print colors will not be in the same position!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.7mm
Filaments Used:
PLA Black Transmission Distance: 0.3
PLA Dark Blue Transmission Distance: 1
PLA Red Transmission Distance: 4
PLA Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #2 (0.24mm) swap to Dark Blue
At layer #12 (1.04mm) swap to Red
At layer #19 (1.6mm) swap to Jade White for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)