Print Profile(1)
Description
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.08mm
The Model is 112.5x150mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.5mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PETG TIANRUI 闪亮Blue Transmission Distance: 1.2
PETG TIANRUI 奶白色 Transmission Distance: 7
PETG JAYO 樱桃红 Transmission Distance: 7.8
PETG TIANRUI 绿色 Transmission Distance: 3
This print uses 5 unique filaments
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #13 (0.56mm) swap to 闪亮Blue
At layer #18 (0.76mm) swap to 奶白色
At layer #29 (1.2mm) swap to 樱桃红
At layer #32 (1.32mm) swap to 奶白色
At layer #52 (2.12mm) swap to 绿色
At layer #53 (2.16mm) swap to 奶白色 for the rest.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)