LMaker

cover

plate_1.png

photo_2025-01-25_16-23-42.jpg

0.2mm layer, 5 walls, 20% infill

Bean Overlord

17469.webp

0.2mm layer, 2 walls, 15% infill

Steps:<ol><li>Raise the X axis to the top</li><li>Release the timing belt</li><li>Place the supports to the X axis</li><li>Lower the X axis until it touches the supports, we will know that it has lowered enough when the z motors lose steps</li><li>Place the timing belt again</li><li>Remove the supports</li></ol>Pasos a seguir:<ol><li>Elevar el eje X a la parte superior</li><li>Soltar la correa de sincronización</li><li>Colocar los soporte al eje X</li><li>Bajar el eje X para apoyarlo sobre los soporte, sabremos que ha bajado suficiente cuando los motores del z pierdan pasos</li><li>Colocar la correa de sincronización de nuevo</li><li>Sacar los soportes</li></ol>

Steps:<ol><li>Raise the X axis to the top.</li><li>Release the timing belt.</li><li>Place the supports on the X axis.</li><li>Lower the X axis until it rests on the supports. We will know it has lowered enough when the z motors lose steps.</li><li>Place the timing belt again.</li><li>Remove the supports.</li></ol>Steps:<ol><li>Raise the X axis to the top.</li><li>Release the timing belt.</li><li>Place the supports on the X axis.</li><li>Lower the X axis until it rests on the supports. We will know it has lowered enough when the z motors lose steps.</li><li>Place the timing belt again.</li><li>Remove the supports.</li></ol>

Artillery X1 - Z Calibrate

ASIA

Print Profile(2)

Description

Comment & Rating (2)

License

Related Models