Crystal Punk Dragon (fuzzy skin)

Crystal Punk Dragon

A semi-offensive dragon.

If you look closely, it not a nice dragon.

We all have a friend that needs this dragon. You know the one i'm talking about.

This print is mostly print in place except for the nose ring. It prints separately and you can attach it very easily. I will make a video if you cant figure it out. But i think you can. The ball part of the nose ring will click in. It takes a little force, but not a lot. 

No glue required. 

I utilized the “fuzzy skin” paint tool to add a contrasting texture that turned out exactly what i was hoping for. The contrast between the two finishes almost looks like i used a different filament entirely. This tool is a game changer for dragon printers and designers.

There are 3 plates.

1. 100% scale pre coloured with 4 colours. 0.2mm layer height. This plate has no nose ring so that you can print it in a totally different colour than the 4 you have for the dragon.
2. 65% scale One colour. 0.12-0.24mm Adaptive layers. The layers are almost all 0.12. Nose ring included on this plate
3. 100% scale Nose ring. 0.12-0.24mm Adaptive layers.

Happy Printing from iBrawnFDM

I use glue on all of my build plates. My favourite is Elmers washable school glue, disappearing purple 

Beware: 3D printed things are not for small children. Some of the models have sharp edges or corners that can break the skin. Parts can break off and be swallowed. Smooth parts can break and become sharp. Please supervise small children while they play with 3D printed things.

Happy Printing from iBrawn3D