TRX4M Mini Cooper Comp Chassis

I designed a universal chassis for the trx4m with a 12 degree angled skid, specifically designed for Bronco/Defender links. NO AFTERMARKET PARTS REQUIRED. Designed to integrate with all stock components with no modification. 

The print profile called "Shelf Princess" is extremely tight and not realistic for driving, but it does look sweet (this is also good if you are planning on clearancing it yourself). BLACK IN PICTURES

The print profile called “Preclearanced Comp” is as it states, take this with a grain of salt, I do not know your setup so more clearancing may be needed. PINK IN PICTURES

The print profile called “Adapting Parts” is for those who already have my Bug Chassis. The only parts you need to swap back and forth for these are the sliders and the bodies. (this is a preclearanced body) PINK IN PICTURES

The ideal setup for this chassis in is 53mm front shocks and 59mm rear shocks, however all shock lengths including stock should work.

Recommendations:

Velcro the stock ESC as close to the front as possible on the motor, be sure to place in an area where the battery wiring can still accessed.

Run the shocks upside down to eliminate the need for shock spacers and to keep the weight as low as possible. 

Velcro vertically to one of the skids.

Magnets used for mounting - DIYMAG 100Pcs Refrigerator Magnets, Small Round Rare Earth Magnets for Crafts, 10x2mm Strong Neodymium Magnets for Whiteboard, Fridge, Billboard, Hobbies in Home, Kitchen, Office and School: Amazon.com: Industrial & Scientific