Bambu Lab Allen/Hex key wrenches, print in place
Print Profile(1)
Description
Boost Me (for free)
I make my models with a lot of effort and really like when people like the model I made. If you appreciate my work, a boost is really welcome and appreciated.
Thanks!
Allen key handles, for both allen keys that are supplied with the Bambu Lab printers. I printed it on my P1S, This profile (which the original maker doesn't have) has pauses at the right layers to insert the keys. Also this profile has the keys on 1 plate, instead of 2 like the other one.
Be sure your allen keys are not bent. If they are bent too much, they might not fit. Under normal circumstances, there is a bit of play. NOT compatible with P2S and H2 style hex keys! Round ones do not fit. Only the ones in the photo. If you have a H2 or P2S, use these:
https://makerworld.com/models/2479925
It wil print little support pieces for the keys to sit on, after printing you can throw them away.
There are 2 automatic pauses:
At layer 23: Insert the small (1.5mm) hex key, resume after
At layer 30: Insert the big (2mm) hex key, after this let it finish printing like normal
This profile also uses Gyroid infill, Which is better for your nozzle and more succes garantee, with grid your nozzle will bend and your print can be knocked loose since it will cross over previously printed lines.
This remix is based on
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (882)