Bambu Lab Allen/Hex key wrenches, P2, H2, A2, X2
Print Profile(1)
Description
This is the variant of my hex key wrenches, but this time for the allen keys that come packed with the P2S and H2 series printers.
My other ones are for the thin hex keys that come with the P1, X1 and A1 series. You can download those here:
https://makerworld.com/en/models/1733366-bambu-lab-allen-hex-key-wrenches-print-in-place
Boost Me (for free)
I made these handles with a lot of effort, so if you wish to, I'd appreciate a free boost. Thanks!
If you have the thick round ones, that come with the P2S and H2 series printers, you need these. They should also fit on the hex keys shipped with the X2D.
The outside of both versions are the same: Only the inside is different.
The keys fit easily, with a bit of tolerance, I did this so it can easily be inserted during printing.
Instructions:
1. Load the 3mf into your slicer or start the print from Bambu Handy
2. The first pause at layer 31: Insert the small allen key into the small handle, after this resume the print.
3. The second pause at layer 40: Insert the big allen key into the big handle, after this resume the print.
4. After the print is finished, you have a complete set of allen keys. You can throw the little support blocks away.
Please leave a review after printing, I appreciate it a lot and it helps others, thank you!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (91)