Print in Place Swivel Mount for Small USB Fan
Print Profile(1)
Description
This a swivel wall mount that allows point the fan in any direction. It attaches to the wall with command strips (size medium).
Designed to print in place with no supports required. Brims recommended because it is tall and thin.
I recommend printing with the 0.16mm High Quality (assuming 0.4mm nozzle) profile for the best chance the mechanism operates smoothly.
It can be difficult to break loose the swivel after printing. Don't be afraid to give it the mustered.
Two models are provided with different tolerances (0.15mm and 0.2mm) between parts in the swivel mechanism, because not all filaments and printers are created equal. I recommend the tighter (0.15mm) model because the operation is smoother. But if that doesn't work well on your printer, you can try the 0.2mm model.
Designed for this “TriPole USB Desk Fan” :
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)