Combo - Flipper Zero Extended Box - Wifi Dev Board Storage - Original Foam - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

anthonywashingtonllc

Tools>Organizers

IP Report

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

4.8 h

2 plates

4.8(75)

Including Wifi DevBoard case (4x M3x8 screws)

4.8 h

3 plates

4.6(7)

0.16mm layer, 2 walls, 15% infill

4.8 h

2 plates

2.0(1)

Open in Bambu Studio

Boost

187

416

111

797

539

Released

Description

A flipper Zero storage case which allows you to use the foam that comes in the factory case for both the flipper zero and the USB Cord. In the top lid, behind the foam, you can also store the wifi dev board with or without the minimalist case installed on the dev board. I've used six m3x25 screws to secure the lid and clasps. This model can also store 2 extra sd cards in the upper lid.

Comment & Rating (111)

@Audifreak117

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

The box itself is truly perfect. However:

Missing Model Parts:How am I supposed to know which WiFi case fits when this is neither specified nor linked? At least the one I have doesn't fit. I also couldn't find the case shown in the image after 30 minutes. Very unfortunate.

Show original

@PineappleJaww

Did you ever find the correct WiFi case?

(Edited)

@Audifreak117

Boosted

Replying to @PineappleJaww :

No, I actually received a different "Slim" case and modified it to accommodate a Wi-Fi module with its complete housing

(Edited)

Show original

@MatiFire

i made a remix that fits the case with the maruder logo

(Edited)

@gramkrakerj

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Plate 1 prints with a small brim. Causes rough edges if not carefully removed. Overall great model!

Strength Issue:(Update) The hinge latch broke right away. The thickness needs some refining.

@MatiFire

The box is perfect but i had a problem with the wifi board case so i made a remix so it fits the wifi board case with the maruder logo.

@tiran

Print Profile

0.16mm layer, 2 walls, 15% infill

Nice Case! Printed the Screws too :)

@Diablo09

Boosted

Care to say where the exact screws are fro print?

@TtotheK

Easy Print! PLA-CF case, ABS Latch

The designer has replied

@anthonywashingt

Looks great!

@Audifreak117

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Fits perfectly, I've still modified it a bit to suit my needs

Show original

@user_3893945663

It truly protects the Flipper but pay attention to the description The insertion of the six (6) M3x25 screws will be necessary to secure the cover and the clasps

Show original

@NorthernPhoenix

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

FANTASTIC case, perfect for what I needed! only reason for 4/5 stars is due to the latch being too thin in the clamp part, even using PETG it would snap first try, but I was able to use a clamp from a different model case (“Flipping flipper zero case”) and it worked perfectly with this case all the same!