Jify

user_2365552021

I printed a bunch of these and put them in the lower drawer of my toolbox, they are such an organization space saver! Thank you! 

Good fit. Threw in a colour change to stay on brand. Thanks!

markarmstrong28

0.2mm layer, 2 walls, 15% infill

excellent fit for 18v ridgid cordless batteries. will be printing more 

Printing_Sh1t

Dual Holder - PETG with PLA Support Interface

Great print. It works perfectly. I added a tab on the side for spacing. My first time adding to another project, so it is not perfect, but it does the job. 
Thank you!

Printed clean and seems sturdy even for PLA!

HmblMkr

user_3843314197

Demon0ne

batteries are a snug fit and works very well. fantastic Design. Thank you for this.

TinkerTechnic

Uranio3D

The mount was a bit tight in 2 areas, but a slight modification made it fit perfectly! I removed 2 of the 3 inner fingers as those 2 would rub against some of the electrical terminals. I also removed about 0.5mm on the top of the side rails and now my Ridgid Octane battery slides right on! Other than that, great design. 

Anto

Chickenbisket

cover

2023-09-23_fy2o0fkjj178.jpg

2023-09-23_oswvv2ltgjnh.jpg

2023-09-23_2rghg6gazn4s.jpg

plate_1.png

plate_1.webp

RevHazlett

20240522_081117_0d667b82-627c-4405-9cea-9787d7b93ac2.webp

Screenshot 2024-05-22 081440_220a18bd-0722-45fe-808c-f2a8e8145a86.webp

<p>I printed off a bunch of these using the double-holder model from Thingiverse.</p><ul><li>Uses 10% Cross Hatch infill (works great with PETG!)</li><li>Four walls is probably unnecessary, but only adds a little weight to the model.</li><li>Support painted on to the bridge using PLA as an interface layer came out <i>clean.</i></li><li>There are three on the plate, but two are disabled. Enable the other two if you wish to fill the plate.</li></ul>

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<div><h1>Summary</h1><div><p>A mount to hold your 18v batteries on a wall or under a cabinet. Screws to the wall with 3 #10 wood screws.</p></div></div>

Print Profile(2)

Description

Summary

Comment & Rating (153)

License