42 Stepper Gimbal
Print Profile(1)
Description
Besides the printed parts, you also need
Two stepper motors, 38mm or 40mm in length will work. If longer, the four copper pillars of the base will need to be extended. They cannot be shorter than 38mm,
Two flange couplings as shown in the pictures, with a fixed pitch of 21mm and a 5mm shaft diameter, used to connect the motor and printed parts
8 M3 nuts and 8 M3*12 screws are used to secure the flange couplings
8 M3*6 screws are used to secure the stepper motors
4 M4*50 copper pillars, serving as the base to secure the gimbal, with a 45mm spacing between the four copper pillars
The top four M3 mounting holes have spacings of 16mm and 20mm
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)