Big Crazy Suprise Box with 1208 screws
Print Profile(1)
Bill of Materials
Description
Big Crazy Suprise Box with 1208 screws
Due to the file size, it was unfortunately not possible for me to upload the full 3MF file.
So it should have looked actually with all screws
And so the printing plates are now set up
So unfortunately you have to multiply the screws yourself.
There is a cross, slot, triangle and square screw.
A total of 136 screws are required for Box01. So each has to be copied 34 times
A total of 616 screws are required for Box02. So each has to be copied 154 times
A total of 432 screws are required for Box03. So each has to be copied 108 times
In addition, glued 24 false screws are placed in the picture in Pink
Now follow the gift ribbon which we attach with a total of 24 screws. So each screw has to be copied 6 times.
In the middle, marked with pink, the large rounds of slot come. 5 of them are needed that are already placed on the plate
As the last screw, the bit holder screw is screwed in and glued to the bit holder
Magnets 6x1 or alternatively 6x2 or 5x1 can be glued into the bit holder and the 4 bits can be glued in ... but do not have to
The total pressure duration is about 5 days so much fun when printing
The inner mass are 140 x 220 x 90 mm
If you are satisfied with my work, I would be happy about a like and a boost from you
I am always grateful to you for the suggestion of note
Boost Me (for free)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (32)