VFC G36 folding Buffer Tube Stock Adapter
Print Profile(1)
Description
Boost Me (for free)
Boost me for free to support my designs. :) I am always welcome to suggestions, feedback and criticisms
VFC G36 Milspec buffer tube stock adapter. Slots right in, and uses a standard hk button to fold.
Shown with a genuine, magpul sl-k carbine stock.
Print in pa6-cf, with a high wall count (minimum of 6), and high infill (minimum of 50%). It may not be able to withstand weaker materials, especially if stressed.
Print at a 45° angle (See attached studio file). This reduces material cost and prevents awful support removal. durable enough with pa6cf. Other materials untested.
IMPORTANT:
-When slotting in, pull the adapter to the right when driving in pins. This should eliminate the slight wobble. There will be a slight gap from the latch side to the body of the adapter.
-PRINT AT 0.12MM HEIGHT OR LOWER. Any higher and the Length of pull adjustment notches won't be correctly sized, causing issues with holding the adjustment selected.
EDIT:
ver 1.1
-Made it able to fold by taking a hk button. Same fitment as previous, but now foldable :)
Ver 1.2
-Fixed weird geometry preventing the button from pushing in all the way. Should now be working as intended.
Ver 1.3
-Revised Geometry for printability. Designed to be printed at a 45° angle.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)