Fan shroud for Asrock RX 7900XTX Phantom Gaming

I was annoyed at the loud stock fans so I made this.

Takes 2 120mm fans and a single 80mm fan, all 25mm thickness.

Sounds way more bearable now at 100% fan speed and i get -5 degrees less on the hotspot.

I used 2200RPM fans to better match the old fans.

Link to the fan adapter: https://a.aliexpress.com/_msOxXWZ

Mount the fans to the bracket using self-tapping screws that come with most case fans,
then secure the bracket to the heatsink using the 6 original screws from the stock shroud; 
and finally snap over the shroud cover on both sides.

There is a space to store the excess cables at the end of the shroud.

Both halves of the bracket are identical so you can print whichever.