#0006 Charizard Chibi
Print Profile(1)
Description
Just a small model I made for passing out at Pokemon related events local to me. :D
FYI - there are a lot of multicolor changes- learn about lowering your flush volumes and flushing into objects, and printing a full plate. fidget infinity cubes are great to flush into - I like to print it standing up 2X4.
Please do not post this file to other sites or sell my digital file. It is for all to print and enjoy. ^^
STL/3MF Multicolor
3MF Multicolor body has 6 colors - manually swap the yellow and red for black and blue rolls in the AMS after the yellow and red completes fully printing (Swapping both is easy after the yellow belly prints). Select the red/yellow AMS slot for the black/blue color on the print pop up page at the start. You can add a pause if you feel you might miss when to manually change the roll. Be sure to match the manual roll to which ever pair you selected on the popup or the eyes will be blue pupiled. I swapped yellow for blue and red for black.
Print Settings:
2 parts - body and wings. wings fit in and will stay if not played with. Use glue if Chari will be moved around a lot so his wings dont get lost.
No Supports needed
Arachne walls
2-3 walls
5-10% infill
If you have adhesion issues, try a brim, glue stick or Aquanet hairspray
Visit my Patreon or MMF store if you’d like to see my non Pokemon flexi animal files.
https://www.myminifactory.com/users/ChibiBestiary3D
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)