10.5-inch tablet or drawing tablet stand that bridges over the keyboard, also suitable for operating multiple phones simultaneously
Print Profile(1)
Description
If you like it, please don't be stingy with boost coupons. I really need points. Thank you for your support
You will need 2 M3 screws 25mm long, 10 M3 screws 15mm long, and 2 M3 nuts. You can use PLA or PETG to print the main structure. There is an either/or structure in the printing plates. The model with circular grooves is compatible with vertical use for at least 3 phones without affecting charging, while the other identical structure is the original model suitable only for iPads or drawing tablets without protective cases. Plate 2 is very large, and if the printer is not in optimal condition, printing may easily fail. It is recommended to clean the build plate and perform a leveling and flow rate calibration before printing. Please visually inspect the first layer for any defects before proceeding with unattended printing.
The original model was designed and produced by scaryPug. I found that this model lacked a horizontal support structure in the middle when using smaller tablets, drawing tablets, or phones. The device could not be supported and would fall, so I used Blender to re-create the model with the following main modifications:
1. Added a large device support surface to the model, compatible with various device sizes.
2. Merged the original author's 13-inch support legs with this 10.5-inch model to ensure maximum compatibility and resolve interference issues when bridging over the keyboard.
3. Drilled many circular holes in the lower device stopper strip for charging cables as needed, so that charging will not be affected when using phones. The original file is also included, so you just need to print according to your needs. (Note: You can print this part with TPU, but when I printed this part with TPU95A or scaled it down to make it less prominent, the user feedback I received was a lack of security, feeling that the device might slip at any time, and they wanted a more honored design, which is how it became the current design)
4.
This remix is based on
License
Comment & Rating (0)