qbeer_1029

cover

IMG_7178.png

IMG_7179.png

IMG_7183.png

IMG_7182.png

IMG_7181.png

IMG_7180.png

Micro GPS mount

plate_1.png

Battery strap

plate_2.png

O4 air unit antenna mount

plate_3.png

ELRS,CRSF T-antenna mount

plate_4.png

The print profile is customized for the A1 mini printer (bed slinger), therefore, the printing speeds have been set to very low value. For Core-XY printers like the P/X-series and H2D, you can probably change the speed to be faster (AT YOUR OWN RISK!!!).

0.2mm layer, 4 walls, 20% infill

Some accessories for the Nexa 3.5 Evo Pro drone. Accessories can be mounted on the standard mounting points on the drone frame and include the following:<ol><li>GPS mount (shown here: NewBeeDrone micro GPS with Compass)</li><li>VTX whip antenna mount (shown here: DJI O4 air unit)</li><li>T-style antenna mount (shown here: Radiomaster RP1 ELRS Rx)</li><li>Battery Strap -- 140mm x 15mm</li></ol>Extra mounting hardware required for GPS mount:<ol><li>2 x M2 x 12mm screws</li><li>2 x M2 washer with 5mm OD (optional, but could lead to loosening of mounting screws over time if not used)</li></ol>

Nexa 3.5 Evo Pro accessories

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models