Marvel Captain America Hueforge

If you like my models, please comment, share your prints, or you can purchase filaments through my links. Every bit of support keeps me motivated to make more awesome stuff. Thanks a lot! 

Demon Slayer series: Demon Slayer Hueforge | Collection - MakerWorld: Download Free 3D Models

One Piece series: OnePiece_Hueforge | Collection - MakerWorld: Download Free 3D Models

Pokemon series: https://makerworld.com/en/collections/22946087-pokemon-hueforge

Dan Da Dan series: https://makerworld.com/en/collections/7165703-dandadan_hueforge

Marvel series: Marvel_Hueforge | Collection - MakerWorld: Download Free 3D Models

Animal series: Animal_Hueforge | Collection - MakerWorld: Download Free 3D Models

Super heroes from Marvel, - Captain America

Print Instruction
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 126.46x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm

Filaments Used:
    #000000 PLA Black  Transmission Distance: 0.1
    #0086d6 PLA Basic Cyan  Transmission Distance: 2.4
    #ffffff PLA Basic Jade White  Transmission Distance: 5
    #fce300 PLA Basic Yellow  Transmission Distance: 6
    #c00d1e PLA Basic Red  Transmission Distance: 4
This print uses 5 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to Cyan
    At layer #10 (0.88mm) swap to Jade White
    At layer #17 (1.44mm) swap to Yellow
    At layer #18 (1.52mm) swap to Red
    At layer #20 (1.68mm) swap to Jade White for the rest.

For only one AMS,
Start with colors as follows,
Slot1: Black
Slot2: Cyan
Slot3: White
Slot4: Yellow
Pause was set at Layer #7 to allow color swap:
Slot1: Black --> Red

******************************************************************************************

******************************************************************************************