Print Profile(1)
Description
Boost Me (for free)
If this model was useful please boost me
Simple fruit picker, Ideal fot apples.
Attaches to a standard pole up to 20mm diameter, (I used a clothes line prop 19.5mm dia).
Threads onto a fizzy drinks bottles 1L to 2L with a thread of 27.5mm outside diameter, (Very Common).
Good for reaching fruit high in the tree.
Parts Required:
1 x M8 x 20 bolt will be required.
1 x Plastic Drinks bottle required.
Assembly:
I had to tap the 8mm thread hole after printing.
If you don't have an M8 tap simply saw slots into the end of the threads on the M8 bolt. This will easily clean out the thread.
Simply cut the bottom off the bottle, and thread onto the picker then attach your pole.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)