Chinese Dragon Celestial - Customizable Clock

Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.

An antique art of a Chinese dragon based on celestial theme of Chinese traditional art. Clock numbers are embedded onto the clock.

Customize your clock. All clocks are wall mountable. The mini clock has a magnet option also. You have the options of the clock size, use of a bezel, hour color accents, clock hands, and a stand. Color them how you see fit. This section you will choose the clock face to make your clock. 

The clocks have 2 sizes, Large(246mm) and Mini(170mm), and an option with or without a Bezel. The clock face without the bezel is the full 246mm(Large) and 170mm(Mini). While the one with the bezel is 234mm(Large) and 158mm(Mini) to accommodate the difference for the 6mm bezel interface. Some faces have an added option of regular numbers and roman numerals. Pictured below are some samples.

Below are links to the clock parts for their respective sizes and the clock hands if needed:

Large: https://makerworld.com/en/models/1220826-clock-large-wall-mount-or-with-display-stand#profileId-1237665

Mini: https://makerworld.com/en/models/1220990-clock-mini-wall-mount-magnets-or-display-stand#profileId-1237871

Clock Hands: https://makerworld.com/en/models/1221053-clock-hands#profileId-1238638

More clock faces can be found at my Clocks Collection: https://makerworld.com/en/collections/5469420-clocks

Chinese Dragon Celestial Clock (The One Shown is 170mm, Mini Clock without Bezel)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Stringing may occur with Hueforge, just use a lighter to whisk them away. 

Filaments Used:

PLA BambuLab Basic Black Transmission Distance: 0.6

PLA BambuLab Basic Red Transmission Distance: 4

PLA BambuLab Basic Gold Transmission Distance: 5

PLA BambuLab Basic Ivory White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer (0.96mm) swap to Red

At layer (1.28mm) swap to Gold

At layer (1.52mm) swap to Ivory White for the rest.

More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames

They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections