Clock Hands

Thank you for downloading my works. If you would like to sell my designs, past and future, a commercial license can be obtained from my MakerWorld or Patreon page.

Trying to give you options if you are looking for a cheaper alternative to the Bambu Clock 011 kit. The quartz kit on other sites are cheaper,  but their shafts tend to be wider. I have provided hands that may fit those, but have only tested it on the Emoon brand from Amazon. Not sure if it will fit other models. The dimensions of the hands for both are listed below. You will have to measure to see if the openings will fit. 

The length of the clock hands are

• For the Large hands:
  • the seconds and minutes are 95mm
  •  the hour is 70mm
• For the Mini hands:
  •  the seconds and minutes hands are 65mm
  • the hours is 48mm

The shaft widths of the hands are

• Bambu Clock kit 011 link: https://us.store.bambulab.com/products/clock-components-kit-011

  • the seconds hand diameter is 1.0mm
  • the minutes diameter is 3.2mm
  • the hours diameter is 5.15mm

   

• Amazon Emoon 9 Piece Clock kit link: https://www.amazon.com/dp/B0B65JV41S?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1 
  • the seconds hand diameter is 1.06mm
  • the minutes diameter is 3.7mm
  • the hours diameter is 5.58mm.

Each plate contains: 1 Minutes Hand, 1 Hours Hand and 2 Seconds Hands . Please note that the 2 Seconds hands are needed to print properly - they allow the print to cool and properly meld, otherwise you will have to print in an 02 Nozzle. They are printed by object so you may choose different color variations to the seconds vs. the hours and minutes hands.

Links to the Clock Frames and Stands:

Large: https://makerworld.com/en/models/1220826-clock-large-wall-mount-or-with-display-stand#profileId-1237665

Mini: https://makerworld.com/en/models/1220990-clock-mini-wall-mount-magnets-or-display-stand#profileId-1237871

Clock Faces can be found in the Clocks Collection: https://makerworld.com/en/collections/5469420-clocks

More prints: Bookmarks -- Portraits -- Coasters -- Clocks -- Puzzles -- Display Stands -- Display Frames

They are sorted and can be found in my Collections - https://makerworld.com/en/@3djd/collections