Sennheiser HD600 series earpad adapter ring

Should work with HD6xx, HD650, HD600, HD58x, HD580, HD660S, HD565, HD545

Depicted in the photo is an HD58x with Shure SRH1540 Alcantara Ear Pads. If you remove the stock foam and use the included foam on the Shure ear pads you get a very similar sound to the stock sound with more comfort in my opinion (as these are my favorite pads).

Took the best of two adapter ring designs and combined them into one.

Assembly:

-apply rubber cement to the earpad and adapter (optional depending on pad)

-stretch the pad over the adapter

-wait for glue to dry snap, snap earpad back into headphone

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

No

Resolution:

0.15 adaptive

Infill: 

20%

Filament: Generic ABS 
 

Notes:

I printed at 100.2% scale to deal with ABS material shrinkage. It probably doesn't matter what material you print with. Make sure to scale the model accordingly to your filament and printer.

How I Designed This ===================

Attributions

I took the bottom flange from https://www.thingiverse.com/thing:4034309 and smashed it into the top shorter section from https://www.thingiverse.com/thing:5725259

Many thanks to bc_sha and Garu_209 for their models.

Category: Audio