Rack Drawers for 10" Racks, 12cm / 20cm / 25cm

Drawers for 10\" racks! Mounting shelf + drawer = space for your 10\" rack. For storing USB sticks and other data carriers, USB cables, network cables, breakfast, etc. Whatever the network admin needs in the server cabinet. With a small stop, so the drawers close flush with the front. Finger hole on the front to open the drawer with your finger. By the way - you can also build a cool cabinet for your living room with the 10\" drawers, completely without a computer! Just print the rack and fill it completely with drawers - tech look! The drawers are primarily designed for my own rack:

https://makerworld.com/en/models/1601846-10-rack-enclosure-10-per-side-3-4-5u-high#profileId-1688552

However, they should also universally fit other 10\" racks.

Attention! The 10\" standard for the clear width is 225mm (= width of the insert between the two side posts). The drawer carriers are 222mm, so they should fit everywhere.

However, there are also racks with less width, so MEASURE before printing!

Overall width at the front panel: 254mm (10\" standard format) Hole to hole distance: 235mm (10\" standard dimension) Suitable for M6 screws (10\" standard screws) Total height 1U = approx. 44mm

Drawer height INSIDE approx. 39mm. Drawer depth optionally 120mm or 200mm. For 200mm and with heavy contents, I recommend supporting the insert with my additional supports:
https://makerworld.com/en/models/1653806-accessories-for-my-10-rack-connectors-supports#profileId-1748817
 

All attachments were designed for my own rack.

When using in other 10\" racks, please check the dimensions first!

Update 1.3.26 New version with top finger hole added, plus a compartment with 250mm depth! Perfectly matching for my new 10\" rack without screws:
https://makerworld.com/en/models/2463730-10-rack-jogirack-without-screws-any-height#profileId-2704559