Wheel-of-Doom w updated Hinge and Handle - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Natedvg

Props & Cosplays>Other Props & Cosplays

IP Report

Print Profile(1)

All

P1S

X1 Carbon

X1E

H2D

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

Optional Version with Secure Hinge and Centered-Split Handle

Designer

11.9 h

9 plates

4.6(5)

Open in Bambu Studio

Boost

Released

Description

I wanted to be able to hand the box over to my Nephews that could play with it, so having a secured top was a must. I shortened the original hinge slot and then replaced what I removed with a “lid” that secures the hinge in place. It is very snug so put the top on and start to close, then push the hinge “lid” in place. I wanted this to go on without glue, so I used some soft pliers to get it flush.

I also moved the original handle to be split between the top and the bottom of the box. this allows for a more secure closure method.

I can add a version of the bottom without the handle adjustment if people want to re-print just the bottom of the box with hinge “lids”.

youtube

wheel

doom

Comment & Rating (24)

@powerpillprints

Boosted

Print Profile

Optional Version with Secure Hinge and Centered-Split Handle

Thank you for this redesign! it turned out great! printed with PLA wood!

The profile uploader has replied

@Natedvg

Glad it turned out well!! it looks great!! love the colors.

@Pawsitive_Chaos

Boosted

no way!! how does the hinge work? is it a piece that can just go on the other box or does it only work with yours?

The designer has replied

@Natedvg

It can go on the another box, but you’d have to reprint the whole bottom piece. I’ll have to play around with a version that can be added to existing models.

@Natedvg

also, I you wanted to do that I’d have to provide a version of the bottom without the handle adjustment, as it’s not compatible with the original top.

(Edited)

@Pawsitive_Chaos

Boosted

Replying to @Natedvg :

ok, I’ll print a new one from your model :)

@AdamRubie

In the picture your model show clasp on the top to keep case closed. Im not seeing those anywhere?

The designer has replied

@Natedvg

Hello! Those were a separate add, I just found the file and scaled them down to fit the box. Since they were an existing file someone else created I didn't want to add it to my model edits. You can find them Here: https://makerworld.com/en/models/876233-latch-with-safety-mounts-via-screws-or-tape?from=search#profileId-829242

@Pawsitive_Chaos

Boosted

Replying to @Natedvg :

how did you attach it? how much did you scale it down?

@Natedvg

Replying to @Pawsitive_Chaos :

I made them about an 1” tall and scaled together. I used this glue which works really well for 3D printed parts Starbond 4 oz. Medium CA Glue... https://www.amazon.com/dp/B0B1WD4JHP?ref=ppx_pop_mob_ap_share

@user_2200511128

yes add the unmodified bottom box pls

The designer has replied

@Natedvg

Model uploaded as a stand-alone file in my profile

(Edited)

@user_2200511128

thanks so much

@chrisclo82

Boosted

Great creation my friend. I had a few dramas putting the hinge lids on but I think it will work. Did everyone else use glue to stick the “insides” to the insides of the cases, the red arrow to its holder and the Doom logo to its holder?? Thank you again. Great idea to go with a great series!!

The designer has replied

@Natedvg

Thank you! Yes due to the original clearances you have to lean the lid slightly forward and it helps. If other people have problems with it I can make a few more adjustments! I used Starbond medium super glue to put everything else together.