Cult of the Lamb Knucklebones Dicegame (16mm Dice)

3D printable version of the Knucklebones minigame from "Cult of the Lamb" videogame.

I watched the video from Makersmuse, which inspired me to create the board game from scratch with a few improvements / changes. 

I designed the game to be used with 16mm dice. You only hold one dice in hand per throw, so bigger dice are much more comfortable. There are also much cooler dice to be found online in this size.

The two parts hold together with magnets (6x3mm) instead of hinges, which then also acts as case. Be ware of the magnet orientation when glueing them in.

You can turn the board to either left or right, depending on your preferece where to cast the dice.

17 dice are required to play and they all fit into the case. For the case you need 14 6x3mm magnets.

The outside of the part has the Cult of the Lamb Logo, which can be easily painted with the fill paint option in BambuStudio for example.

I also taped some very thin self-adhesive velour tape into the throwing area, which absorbs a lot ob the “hard” sound from dice on plastic, and also reduces the rusteling of the dice during trasport.

I added a small testfit part, so you can test if your dice fit correctly, otherwise scale X/Y accordingly in your slicer.

The game rules can be found here:

https://cult-of-the-lamb.fandom.com/wiki/Knucklebones

Inspired by Makersmuse on Youtube:

https://www.youtube.com/watch?v=kPLRX0LjzWs

 

Update:

• added a version for 5x2mm magnets. (currently untested from my side)

Udate 11.01.2026:

• added a new Knucklebones Logo
• added a version with scoreboard in the dice area
• added a Dice Testfit part → Print it first to see if your dice fit correctly, otherwise scale X/Y accordingly