Search models, users, collections, and posts

Double Pulley Pliers - Print in place

FGorgo
Tools>Hand Tools
IP Report
GIF

Print Profile(2)

All
A1 mini
P1S
X1
A1
P1P
H2D
X1E
X1 Carbon
H2D Pro
H2S
P2S
H2C
X2D
A2L
0.2mm layer, 4 walls, 15% infill
0.2mm layer, 4 walls, 15% infill
Designer
52 min
1 plate
4.7(18)
PETG, 0.2mm layer, 4 walls, 30% infill
PETG, 0.2mm layer, 4 walls, 30% infill
55 min
1 plate
4.8(4)
Open in Bambu Studio
Boost
149
352
27
13
288
189
Released 

Description

Double Pulley Pliers – Power Meets Precision

Unlock the power of leverage with the Double Pulley Pliers, a 3D-printable tool engineered for maximum grip with minimal effort. Thanks to its innovative dual-pulley mechanism, this design multiplies your hand force to deliver a strong, secure grip—perfect for handling small components, delicate materials, or precision tasks where control matters.

Important: Adjust the Spring Arms Before Use

After 3D printing, the spring arms are in a non-functional position.

Before using the pliers, gently lift and rotate the spring arms into their correct working position, as shown in the picture.

This step is necessary to ensure proper spring action and tool functionality.

Boost Me (for free)

Membership

Join
PIP
pip
pliers
pulley pliers
pulley
compound pliers
printin place
Hinge
print in place
printinplace
Tool
hand tool
spring loaded
engineering tool
functional print
lever
engineer
workshop tool
makers
printable tool
mechanical
mechanical tool

Comment & Rating (27)

(0/1000)
@user_229440538
Print Profile
0.2mm layer, 4 walls, 15% infill
good print quality but the spring force to open back up is not strong enough
(Edited)
The profile uploader has replied
profile
1
Reply
@FGorgo
Hi! Thanks for your feedback! Try opening and closing it manually to loosen the mechanism — sometimes that’s necessary at first.
(Edited)
1
Reply
@user_229440538
Replying to @FGorgo :
Thank you for the suggestion! Doing this and putting the „spring“ back into the print position and holding the pliers open for a bit helped a lot.
(Edited)
1
Reply
@FGorgo
Replying to @user_229440538 :
I’m glad to hear that!
(Edited)
1
Reply
@Orionsf5
Boosted
Print Profile
0.2mm layer, 4 walls, 15% infill
printed nice! and strong!
profile
1
Reply
@user_3987689112
Print Profile
PETG, 0.2mm layer, 4 walls, 30% infill
It worked
Show original
0
Reply
@user_3871236234
Those are not pulleys; they’re levers!
The designer has replied
0
Reply
@FGorgo
You are technically correct, which is the best kind of correct
0
Reply
@0zymandias
Print Profile
0.2mm layer, 4 walls, 15% infill
there’s a small flaw in the design of the spring between the grips. not enough relief where the springs overlap each other
0
Reply
@Nicko_299
Print Profile
0.2mm layer, 4 walls, 15% infill
works super well
Show original
0
Reply
@thingsimake
Print Profile
0.2mm layer, 4 walls, 15% infill
do not use PLA the spring part broke immediately and the whole thing broke while using it
0
Reply
@TraceParadox
Print Profile
0.2mm layer, 4 walls, 15% infill
Okayish
0
Reply
@Adeawiel
Print Profile
0.2mm layer, 4 walls, 15% infill
0
Reply
@user_3581211828
Print Profile
PETG, 0.2mm layer, 4 walls, 30% infill
(Edited)
0
Reply

License

If you want to use this model commercially, please join my membership.
Join Now
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives

Related Models

Toothpick Launcher Print-in-Place
Toothpick Launcher Print-in-Place
Its On My Mind
47.8 k
16.6 k
Print in Place Planetary Gear Spinner
Print in Place Planetary Gear Spinner
Hamstah
45.8 k
7.1 k
Box - small and print in place
Box - small and print in place
YogiTech
79.3 k
16.4 k
Fidget Click Flick Swoosh - Print in place!
Fidget Click Flick Swoosh - Print in place!
Louis
48.8 k
8 k