Crown Royal Folding door box
Print Profile(8)
Bill of Materials
- Steel/Alu rods 2pcs x 1: D6mm - 24.5cm long
Description
Boost Me (for free)
Boosting this design is free for you, yet it makes a huge difference for me. Thanks for helping me keep creating!
Membership
Commercial License
If you find my designs interesting and useful, and would like to see more in the future, please consider giving me a boost and becoming a supporting member.
Also, if you need parts for any of my designs, please use the BOM link provided on the model page when buying. This gives me a small commission.
UPDATE : 02.09.2025
New print profiles for Crown Royal Apple, Black and Peach has been added to the collection!
Crown Royal folding door box
After a lot of requests i'm proud to present the newest addition to the folding door box family.
Big thanks to shane1234c for helping me with prototyping.
This folding door display box is perfect for showing of your bottle of Crown Royal. If you add the base with Led lamp kit 001, your bottle will glow and make for a beautiful display!
If your tastebuds favor something else, check out my other boxes :
- Jack Daniels No7
- Jack Daniels Tennessee Honey
- Wine Box
- Jeagermeister
- RedBull
- Sode Can wine box
- Jewellery box
- Jameson
At the moment there are two print profiles. One with the full sett laid out on three beds (H2D) And one with the base for Led Lamp Kit 001.
All the parts are painted so you only have to choose your type of filament, slice and press print.
PS : This is made to fit the newest Bottle from Crown Royal 750ml. I don't know if the old bottle will fit.
3D printed parts :
- knobs x 2
- Pins for top x2
- Base x 1
- Top x 1
- Back pcs x 13
- Door pcs x 26
Additional parts :
- Steel/alu rods x2 (D6mm - 24.5cm long) You have to cut them to length.
- Magnets D6x2mm x 26
- CA glue
Steel rods: Buy here > (affiliate link)
This is an affiliate link — I may earn a small commission if you buy through it, at no extra cost to you. It helps support my future designs.
Magnets : Buy via maker supply (affiliate link)
Ca glue: Buy here > (affiliate link)
Assembly:
After the rods are in place, start building the box from the bottom up. All the parts are marked with numbers that corresponds with the instruction below.
Once assembled it should look like this :
Hope you have fun building the box. If you do, i would appreciate a follow and a comment/review. And if you really like it maybe even a boost. 😁
Follow me if you want to see more of my designs in the future!
Documentation (5)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (243)