High-Pressure Washer Trolley Mount Set
Print Profile(1)
Description
This set includes all the mounts for the accessories of a high-pressure washer.
It is designed for the following trolley (but is also available at any DIY store at a reasonable price:
https://www.bueromarkt-ag.de/transportwagen_boettcher-ag,p-545-071,l-google-prd,pd-b2c.html?utm_source=google&utm_medium=cpc&utm_campaign=19706804283&gad_source=1
It is important that the diameter of the trolley handle is 25mm.
The lance holders have a span at the top of approx. 30-40mm (variable by screwing) and at the bottom at the nozzle up to max. 36mm.
The lower holder is designed with holes so that the residual water from the lance can drain off and it is always stored dry.
The hose holder is equipped with a print in place hinge and a click fastener.
The size is very variable, depending on how often the hose is folded.
For fixing, you will also need 5x M4x16 machine screws (M4 threads must be cut through the pipe on the trolley).
For the lance holder, an M4x60 machine screw.
The head should be glued to the holder.
A melt-in thread for M4 screws is required on the lance holder handle (top).
Have fun printing!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)