Tardis Storage Box

This is a T.A.R.D.I.S. box with a removable lid, there to store whatever you like.

Unfortunately as it's constrained by human physics, this one is not bigger on the inside, but for those interested, these are the dimensions:

• External dimensions (including lid): 84 x 84 x 175mm
• Internal storage space: 70.6 x 70.6 x 123mm

My profile is fully painted and ready to print with an AMS, with only 3 or 4 colours require:

• Blue
• White
• Black
• Silver (Optional, this is only used for the keyhole and as it's so small, you could probably get away with using white for this)

Print settings

I'd highly recommend you use my profile for printing as it's fully painted and tested, and I've spent time optimizing things like print speeds etc to ensure decent performance (especially around the door handles which are particularly small and thin). However, if you did want to slice it yourself, here's a few pointers:

• Layer Height: I've designed this to be printable at 0.2mm or smaller. My profile and the photos I included are all of a print at 0.2mm layer hight in the interest of keeping print time down. However, a smaller layer height will give you increased detail in the signs, door handles, and keyhole.
• Support: None is required for this print. It may (if you have auto on) suggest supporting the door handles but I'd advise agains this. Using my profile they print great, and if you use supports on them, it can fuse to them.
• Speed: Try to ensure your outer walls are not exceeding 50mm/s, and ensure that the door handles are covered by the small perimeter threshold woth a 40-50% speed.

My TARDIS collection currently includes: