Airless Grid Necktie -TPU
Print Profile(3)
Bill of Materials
Description
Download my newest model here! ;) https://makerworld.com/en/models/2964414
Airless Grid Necktie -TPU
This is a fully 3D-printable necktie designed for comfort, movement, and modern aesthetics. 🎨👔 Made entirely from TPU this tie skips the stiffness and brings serious flex to your fit. 💪 With a wall-less, top-less, bottom-less infill design, it appears transparent from the front, creating a breathable, grid-like visual that’s eye-catching, lightweight, and incredibly flexible. 💨🔲
Whether you're showing off your maker skills 🛠️ or just want to add a futuristic twist to your wardrobe 🚀, this tie brings wearable filament fashion to life. ✨
🔍 Design Features
🔹 No shell design – Built from infill only (no walls, top, or bottom layers) for a translucent, airy look.
🔹 TPU-only construction – Both the tie and the neck strap are printed from flexible TPU for all-day comfort and stretch.
🔹 Strap-on design – No tying required! The built-in TPU strap wraps around the neck and connects easily- maker-style.
🔹 Fast to print, fun to wear – Minimal material, no supports, and big style impact for your next event or photoshoot.
🔹 Scalable for any wearer - This design can be stretched, shrinked, or expanded in any way to get it to fit!
To get the best printing results, check out this video!
Assembly guide below ⬇️
Boost Me (for free)
Models like this take a lot of time (and filament) to create. 🧵
Since 1 Boost = 70g of Bambu Lab filament, your support goes directly into making more prototypes! 🚀
Boosting me is a fantastic way to show support — and it really helps keep my printers running! 🙏💛
Thank you!
Membership
If you’d like to support me even further, consider joining my Support Tier Membership! 🙌 For just $3 a month, you’ll be making a huge impact on my work. Your contributions help me keep creating, improving, and innovating. Together, we can keep pushing the boundaries! 😎💛
Assembly guide:
Step 1, Take the 3 pieces of the tie and lay them out in order. Use a soldering iron or glue to bond them together. Make sure it's strong!
Step 2, Cut around 750mm of TPU filament, and slide on two of the connectors onto the ends of the filament, remember to install them in the correct direction!
Step 3, Slide the filament through one of the holes in the grid infill and then loop around and slide through the other side of the connector. Repeat for the other side
Step 4, Slide the tie around your collar, and cinch it up by pulling on the loose-ends of the TPU filament. You can slide the connectors around until its comfy. -Enjoy! :D
Membership
If you’d like to support me, consider joining my Support Tier Membership! For just $3 a month, you’ll be making a huge impact on my work. Your contributions help me keep creating, improving, and innovating! 😁
No AI is used in this model. All of my models are made by me in Fusion 360.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (183)