Search models, users, collections, and posts
A1 Mini Heatbed Cable Protector
IP Report
Print Profile(1)
Standard Profile
Designer
28 min
1 plate
Open in Bambu Studio
Boost
408
1083
343
28
1.7 k
1.5 k
Released
Description
A1 Mini Heatbed Cable Protector
Original version did not fit the A1 Mini; I ground up made a new version for the A1 Mini regardless it is no concern of the cable kink or bend stated by manufacturer. It is still better than nothing to prevent the heatbed cable to get bend in the wrong allowance.
A1 Mini will not share the same fate as the regular A1!
Additonal model can protect your AMS Lite power cable here: https://makerworld.com/en/models/104167#profileId-111236
Profiles
- Non-AMS Version
Disclaimer
Print quality is base on your filament brand, filament parameters and environment; please take research for the optimal printing quality. Profiles are optimized to ensure text is clear, minimal banding and minimal ghosting.
Tips
- Clean the bed with dish soap (degrease).
- Avoid touching the bed surface with your bare finger.
- For non-textured bed, highly recommended purple glue application.
- Slow down print speed for tall prints.
Updates
Version 1.0
- Initial Release
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-NoDerivatives
Comment & Rating (343)